| DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | AND10050-6 AND AND10050-6 |
| CONNECTION QUANTITY | 2 |
| CONNECTION TYPE | INLET AND OUTLET |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.091 CUBIC INCHES |
| DISPLACEMENT TYPE | CONSTANT |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT MINUS 65 DEG F TO PLUS 275 DEG F |
| MOUNTING BOLT HOLE SPACING | 1.750 IN. BY 1.750 IN. C TO C |
| MOUNTING HOLE DIAMETER | 0.280 INCHES NOMINAL |
| MOUNTING GOVERNMENT STANDARD | NONE |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 10000.0 |
| PITCH DIAMETER | 0.375 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| SPECIAL FEATURES | HAS INTERNAL DRAIN PORT |
| SPLINE LENGTH | 0.594 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.406 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.347 INCHES NOMINAL |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE PITCH | 32/64 |
| SPLINE QUANTITY | 12 |
| SURFACE TREATMENT | ANODIZE HOUSING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.563-18 |
| TORQUE LOAD RATING | 43.0 INCH-POUNDS |