|
|
|
National Stock Number:
2520-00-363-4195
Federal Supply Class:
2520
National Item Identification Number:
003634195
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 326665 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 326665 | 7X677 | GENERAL MOTORS LLC | | 6264532 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT |
|
Techincal Specification:
| FIRST END BEARING SEAT | NOT INCLUDED | | FIRST END TYPE | FLANGED | | FLANGE OUTSIDE DIAMETER | 6.560 INCHES NOMINAL | | FLANGE OVERALL THICKNESS | 0.840 INCHES MINIMUM AND 0.920 INCHES MAXIMUM | | FLANGE THICKNESS AT MOUNTING HOLE | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | | HOLE DIAMETER | 0.509 INCHES MINIMUM AND 0.519 INCHES MAXIMUM | | MATERIAL | STEEL | | METALLIC HARDNESS RATING | 200.0 MINIMUM BRINELL STANDARD | | MOUNTING FACILITY TYPE AND QUANTITY | 5 UNTHREADED HOLE(S) | | OVERALL LENGTH | 31.846 INCHES NOMINAL | | SECOND END BEARING SEAT | NOT INCLUDED | | SECOND END PITCH DIAMETER | 1.250 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 1.713 INCHES NOMINAL | | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 | | SECOND END SPLINE QUANTITY | 30 | | SECOND END SPLINE TYPE | INVOLUTE | | SECOND END TYPE | SPLINED |
|
|