|
|
|
National Stock Number:
2520-00-871-8942
Federal Supply Class:
2520
National Item Identification Number:
008718942
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 3202L2976 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | 3202L2976 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | 8307-1861 | 10086 | GRADALL COMPANY THE | | SD32016 | 10086 | GRADALL COMPANY THE | | P6282 | 59690 | KOEHRING CO LORAIN DIV | | P6282 | 8E499 | KOEHRING CRANES AND EXCAVATORS INC SUB OF NORTHWEST ENGINEERING CO | | SD32016 | 18859 | DUPLEX DIV WARNER AND SWASEY CO |
|
Techincal Specification:
| FIRST END BEARING SEAT | NOT INCLUDED | | FIRST END TYPE | FLANGED | | FLANGE HOLE TAPER | 0.453 INCHES NOMINAL PER FOOT | | FLANGE OUTSIDE DIAMETER | 6.438 INCHES NOMINAL | | FLANGE OVERALL THICKNESS | 1.359 INCHES NOMINAL | | FLANGE THICKNESS AT MOUNTING HOLE | 0.422 INCHES NOMINAL | | MOUNTING FACILITY TYPE AND QUANTITY | 12 TAPERED HOLE | | OVERALL LENGTH | 36.125 INCHES NOMINAL | | SECOND END BEARING SEAT | NOT INCLUDED | | SECOND END PITCH DIAMETER | 1.938 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 3.000 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 2.000 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 1.875 INCHES NOMINAL | | SECOND END SPLINE PRESSURE ANGLE IN DEG | 15.0 | | SECOND END SPLINE QUANTITY | 21 | | SECOND END SPLINE TYPE | INVOLUTE | | SECOND END TYPE | SPLINED | | TAPER MAJOR DIAMETER | 0.609 INCHES NOMINAL |
|
|