| ATTACHMENT METHOD | MOUNTING HOLE |
| BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE TYPE | STRAIGHT |
| FACE NOMINAL WIDTH | 0.562 INCHES |
| HELIX ANGLE | 45.9664 DEGREES |
| HUB NOMINAL DIAMETER | 0.260 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| PITCH DIAMETER | 0.3320 INCHES MINIMUM AND 0.3330 INCHES MAXIMUM |
| MATERIAL | STEEL OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE NOMINAL DIAMETER | 0.052 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 40 TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN AND 1 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.188 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.274 INCHES |
| PRESSURE ANGLE | 25.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD FORM DIRECTION | LEFT-HAND |
| THREAD FORM QUANTITY | 4 |