3040-00-512-9223, SHAFT,STRAIGHT

National Stock Number:
3040-00-512-9223

Federal Supply Class:
3040

National Item Identification Number:
005129223

Description:
SHAFT,STRAIGHT

Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

Manufacturer Information:

102707R1	31007	NAVISTAR INTL CORP
102707R1	89346	NAVISTAR INTL CORP TRUCK BR OHIO PLANT
15540	12472	LOCKWOOD CORP
7974962	19207	U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
48B2071	27996	HEIL ENVIRONMENTAL INDUSTRIES
7740-22-4	81336	CHIEF OF ENGINEERS DEPT OF ARMY

Techincal Specification:

END SIMILARITY	NOT IDENTICAL
EXTERNAL KEYWAY LENGTH	1.250 INCHES NOMINAL FIRST END
EXTERNAL KEYWAY LENGTH	1.250 INCHES NOMINAL SECOND END
FIRST END ANGLE BETWEEN KEYWAYS	180.0 DEGREES NOMINAL
FIRST END HOLE DIAMETER	0.1250 INCHES NOMINAL FIRST HOLE
FIRST END DIAMETER	1.9970 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM
FIRST END DISTANCE FROM HOLE CENTER TO END	1.000 INCHES NOMINAL
FIRST END DISTANCE FROM KEYWAY CENTER TO END	1.000 INCHES NOMINAL
FIRST END STYLE	TWO WOODRUFF KEYWAYS AND CROSS DRILLED HOLE
FIRST END KEYWAY WIDTH	0.1880 INCHES NOMINAL
OVERALL LENGTH	11.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-633 MIL SPEC ALL MATERIAL RESPONSES
MATERIAL	STEEL COMP 1113 OR STEEL COMP 1116 OR STEEL COMP 1117
SECOND END ANGLE BETWEEN KEYWAYS	180.0 DEGREES NOMINAL
SECOND END HOLE DIAMETER	0.1880 INCHES NOMINAL FIRST HOLE
SECOND END DIAMETER	1.9970 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM
SECOND END DISTANCE FROM HOLE CENTER TO END	1.000 INCHES NOMINAL
SECOND END DISTANCE FROM KEYWAY CENTER TO END	1.000 INCHES NOMINAL
SECOND END STYLE	TWO WOODRUFF KEYWAYS AND CROSS DRILLED HOLE
SECOND END KEYWAY WIDTH	0.1880 INCHES NOMINAL
SPECIAL FEATURES	FIRST END PARTIAL BORE 10.250 IN. DP;FIRST END INT THD 0.375 IN. LG

Click here to Register for Free 30-day Trial