|
|
|
National Stock Number:
3405-00-148-2119
Federal Supply Class:
3405
National Item Identification Number:
001482119
Description:
SAW,BAND,METAL CUTTING
Detail:
A VAIRABLE SPEED SAW, BASICALLY DESIGNED TO CUT AND/OR FILE METAL, USING A BAND SAW BLADE AND/OR A BAND FILE THAT IS REVOLVED OR ROTATED AROUND A DRIVER AND IDLER WHEEL(S). THE TEETH FORM A VERTICAL LINE WHILE PASSING THROUGH THE WORK. IT IS EQUIPPED WITH A FIXED OR TILTING HORIZONTAL TABLE FOR MOUNTING THE WORK. THE WORK TABLE AND/OR SAW FRAME MAY BE CAPABLE OF TILTING AS A UNIT TO PERMIT ANGLE CUTTING. IT MAY BE PROVIDED WITH SUFFICIENT CUTTING SPEEDS TO ALLOW FOR WOOD AND/OR OTHER MATERIAL CUTTING. EXCLUDES SAW (3), BAND, CUTOFF.
|
Manufacturer Information:
| 1613-2 | 18056 | DOALL BALTIMORE COMPANY | | 3405-2252-1613 | 99998 | DEFENSE SUPPLY CENTER RICHMOND INDUSTRIAL PLANT EQUIPMENT /DLA/ | | TF2020A | 18056 | DOALL BALTIMORE COMPANY |
|
Techincal Specification:
| DRIVE METHOD | ELECTRIC MOTOR | | HORSEPOWER RATING | 3.000 | | CURRENT TYPE | AC | | VOLTAGE RATING | 230.0 VOLTS NOMINAL OR | | 460.0 VOLTS NOMINAL | | FREQUENCY RATING | 60.0 HERTZ NOMINAL | | PHASE | THREE | | ELECTRIC MOTOR QUANTITY | 1 | | MOUNTING TYPE | FLOOR | | TABLE LENGTH | 24.000 INCHES NOMINAL | | TABLE WIDTH | 24.000 INCHES NOMINAL | | TABLE TYPE | TILTING | | TABLE RIGHT TILT ANGLE IN DEG | 45.0 | | TABLE LEFT TILT ANGLE IN DEG | 10.0 | | BAND TYPE FOR WHICH DESIGNED | FILE OR | | SAW BLADE | | FILE MAXIMUM LENGTH ACCOMMODATED | 123.000 INCHES | | FILE MAXIMUM WIDTH ACCOMMODATED | 1.000 INCHES | | BLADE MAXIMUM LENGTH ACCOMMODATED | 128.000 INCHES | | BLADE MAXIMUM WIDTH ACCOMMODATED | 1.000 INCHES | | FRAME TYPE | RIGID | | VISE | NOT PROVIDED | | THROAT DEPTH | 16.000 INCHES NOMINAL | | DISTANCE BETWEEN GUIDE AND TABLE | 13.000 INCHES NOMINAL | | CUTTING SPEED RANGE | 35.0 TO 6000.0 FEET PER MINUTE | | INFINITE CUTTING SPEED FEATURE | PROVIDED | | POWER FEED FEATURE | PROVIDED | | FEED METHOD | WORK INTO CUTTING BAND | | BRAKING FACILITY | NOT INCLUDED | | BUILT-IN COOLANT SYSTEM | INCLUDED | | INTEGRAL BUTT WELDER | INCLUDED | | INTEGRAL GRINDER | INCLUDED | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | ANCY AND AMSE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 18056 | | DESIGN CONTROL REFERENCE | TF2020A |
|
|