| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| ITEM STRUCTURAL COMPOSITION | BRAIDED COTTON CORD FOURTH LAYER |
| ITEM STRUCTURAL COMPOSITION | BRAIDED STEEL WIRE THIRD LAYER |
| ITEM STRUCTURAL COMPOSITION | MOLDED RUBBER, SYNTHETIC OUTER LAYER |
| ITEM STRUCTURAL COMPOSITION | SHEET RUBBER FIRST LAYER |
| ITEM STRUCTURAL COMPOSITION | SHEET RUBBER SECOND LAYER |
| OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
| OUTSIDE DIAMETER | 0.688 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 114.750 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| NOMINAL THREAD SIZE | 0.438 INCHES FIRST END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| THREAD QUANTITY PER INCH | 20 FIRST END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |
| SPECIFICATION/STANDARD DATA | MIL MIL-H-24135,CLASS 1 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |