| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END CONNECTION DESIGN | ELBOW SECOND END |
| END FLANGE CONSTRUCTION | SOLID SECOND END |
| BOLT HOLE DIAMETER | 0.205 INCHES NOMINAL SECOND END |
| BOLT CIRCLE DIAMETER | 1.312 INCHES NOMINAL SECOND END |
| BOLT HOLE QUANTITY | 4 SECOND END |
| BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | RECESSED FLANGE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION STYLE | RECESSED SECOND END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE OUTSIDE DIAMETER | 2.312 INCHES NOMINAL SECOND END |
| FLANGE STYLE | ROUND W / BOLT HOLES SECOND END |
| FLANGE THICKNESS | 0.297 INCHES NOMINAL SECOND END |
| FLOW ANGLE | 38.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| ITEM STRUCTURAL COMPOSITION | BRAIDED CORROSION RESISTANT STEEL WIRE FIRST LAYER |
| ITEM STRUCTURAL COMPOSITION | BRAIDED CORROSION RESISTANT STEEL WIRE OUTER LAYER |
| OPERATING PRESSURE | 1250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTSIDE DIAMETER | 1.109 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 26.240 INCHES NOMINAL EXCLUDING END FITTINGS |
| MINIMUM INSIDE BENDING RADIUS | 7.380 INCHES |
| NOMINAL THREAD SIZE | 1.312 INCHES FIRST END |
| RECESS DEPTH | 0.136 INCHES NOMINAL SECOND END |
| RECESS DIAMETER | 1.510 INCHES NOMINAL SECOND END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| THREAD QUANTITY PER INCH | 12 FIRST END |
| THREAD SERIES DESIGNATOR | UN FIRST END |
| VACUUM IN TORR | 50.8 |
| TEMP RATING | -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |