|
|
|
National Stock Number:
4810-01-220-7415
Federal Supply Class:
4810
National Item Identification Number:
012207415
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 442M | 35795 | LESLIE CONTROLS, INC. |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 FIRST END | | BONNET TYPE | INSIDE SPRING | | CONNECTION TYPE | FLANGE THIRD END | | CONNECTION TYPE | FLANGE FIRST END | | FLANGE SHAPE | ROUND WITH HOLES FIRST END | | FLOW CONTROL DEVICE | DISK | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B61 ASSN STD SINGLE MATERIAL RESPONSE BODY | | MATERIAL | COPPER ALLOY BODY | | MEDIA FOR WHICH DESIGNED | WATER, SALT SINGLE RESPONSE | | NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 1.500 INCHES | | OPERATING PRESSURE | 375.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE | | RENEWABLE SEAT RING TYPE | PRESSED-IN | | SPECIAL FEATURES | USED ON WPB 110 FT U. S. COAST GUARD VESSELS; FIRST END STYLE DESIGNATOR PLAIN; 3RD END STYLE DESIGNATOR GASKET SEAL; 2ND END RELATIONSHIP WITH 1ST END IDENTICAL; 3RD END RELATIONSHIP WITH PRECEDING ENDS NOT IDENTICAL WITH 1ST OR 2ND END; END CONNECTION QUANTITY 3; VALVE LOADING SPRING LOCATION IS INTERNAL; STEM MOVEMENT DIRECTION IS ASCENDING; 1ST END FLANGE OUTSIDE DIAMETER IS 5.000 INCHES | | STYLE DESIGNATOR | CROSS | | THREAD DIRECTION | RIGHT-HAND THIRD END |
|
|