| STYLE DESIGNATOR | ANGLE |
| VALVE OPERATION METHOD | AUTOMATIC |
| MATERIAL | ALUMINUM ALLOY 2017 BODY |
| STEEL COMP 303 FLOW CONTROL DEVICE |
| STEEL COMP 303 SEAT |
| STEEL COMP 303 STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/5,ALLOY 2017,T4 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| QQ-S-763,CLASS 303,CONDA FED SPEC SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE |
| QQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE SEAT |
| QQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE STEM |
| SURFACE TREATMENT | ANODIZE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CALSS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| FLOW CONTROL DEVICE | POPPET |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | 85.0 DEG FAHRENHEIT SINGLE RESPONSE |
| POWER DRIVE OPERATING PRESSURE | 125.0 POUNDS PER SQUARE INCH NOMINAL |
| CONNECTION TYPE | THREADED INTERNAL BOSS ALL ENDS |
| CONNECTION STYLE | GASKET SEAL(BOSS) ALL ENDS |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES ALL ENDS |
| THREAD SERIES DESIGNATOR | UNJF ALL ENDS |
| NOMINAL THREAD SIZE | 0.750 INCHES ALL ENDS |
| THREAD CLASS | 3B ALL ENDS |
| THREAD DIRECTION | RIGHT-HAND ALL ENDS |
| BONNET TYPE | INSIDE SPRING |
| BONNET ATTACHMENT METHOD | INTEGRAL |
| DISK LOADING METHOD | SPRING |
| OPENING PRESSURE SETTING | 125.0 POUNDS PER SQUARE INCH |
| ADJUSTABLE PRESSURE RANGE | 0.0 TO 250.0 POUNDS PER SQUARE INCH |
| FEATURES PROVIDED | PRESSURE TIGHT OUTLET SIDE |
| TEST DATA DOCUMENT | 18876-9197576 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |