|
|
|
National Stock Number:
5305-00-286-2092
Federal Supply Class:
5305
National Item Identification Number:
002862092
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| EE1179M17 | 28298 | SMITH AND SMITH AIRCRAFT CO |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 3.647 INCHES MINIMUM AND 3.659 INCHES MAXIMUM | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 3.893 INCHES MINIMUM AND 3.913 INCHES MAXIMUM | | FIRST DIAMETER FROM HEAD | 0.125 INCHES MINIMUM AND 0.187 INCHES MAXIMUM | | HEAD HEIGHT | 0.107 INCHES MINIMUM AND 0.123 INCHES MAXIMUM | | HEAD DIAMETER | 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM | | HEAD STYLE | FILLISTER | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SPECIAL FEATURES | ONE DRILLED HOLE IN HEAD | | SURFACE TREATMENT | ZINC OVERALL | | THREAD LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
|
|