5935-00-808-2147 CONNECTOR,RECEPTACLE,ELECTRICAL Index 6130-00-808-2165 POWER SUPPLY

National Stock Number:
5305-00-808-2152

Federal Supply Class:
5305

National Item Identification Number:
008082152

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
HT9M2873197HI-SHEAR CORPORATION
HT9M28L4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC
NAS589-2880205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
THREAD SERIES DESIGNATORUNF
NOMINAL THREAD DIAMETER0.562 INCHES
THREAD QUANTITY PER INCH18
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.906 INCHES MINIMUM
FASTENER LENGTH2.640 INCHES MINIMUM AND
2.687 INCHES MAXIMUM
MATERIALSTEEL COMP 4140 OR
STEEL COMP E4340 OR
STEEL COMP 6150 OR
STEEL COMP 8735 OR
STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR
MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR
MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR
MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR
MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND
CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND
40.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
HEAD STYLEFLAT COUNTERSUNK
HEAD DIAMETER1.134 INCHES MINIMUM AND
1.141 INCHES MAXIMUM
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND
101.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLEHIGH-TORQUE
GRIP LENGTH1.750 INCHES NOMINAL
GRIP DIAMETER0.5605 INCHES MINIMUM AND
0.5615 INCHES MAXIMUM
SURFACE FINISH32.0 MICROINCHES GRIP
32.0 MICROINCHES THREADS
SPECIFICATION/STANDARD DATA80205-NAS589 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us