5306-01-100-2006 BOLT,MACHINE Index 5305-01-100-2008 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-100-2007

Federal Supply Class:
5305

National Item Identification Number:
011002007

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.


Manufacturer Information:
2227074-159211PARKER-HANNIFIN CORPORATION
2227074-182106PARKER-HANNIFIN CORPORATION
2227074-193835PARKER HANNIFIN CORPORATION


Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.078 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER0.400 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER1.120 INCHES NOMINAL
EXTENDED WASHER THICKNESS0.060 INCHES NOMINAL
EXTENDED WASHER DIAMETER0.411 INCHES MINIMUM AND 0.421 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY3
FASTENER LENGTH1.120 INCHES NOMINAL
FIRST DIAMETER FROM HEAD0.304 INCHES MINIMUM AND 0.314 INCHES MAXIMUM
HEAD HEIGHT0.250 INCHES NOMINAL
HEAD STYLEHEXAGON EXTENDED WASHER
INTERNAL DRIVE STYLECLUTCH TYPE I
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5659 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-12 OVERALL
PROPRIETARY CHARACTERISTICSPACS
NOMINAL THREAD DIAMETER0.375 INCHES
SECOND DIAMETER FROM HEAD0.375 INCHES NOMINAL
SHANK UNTHREADED HOLE DIAMETER0.125 INCHES MAXIMUM ALL HOLES
WIDTH BETWEEN FLATS0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM
SURFACE TREATMENTPASSIVATE OVERALL
THIRD DIAMETER FROM HEAD0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD LENGTH0.212 INCHES NOMINAL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us