5306-00-003-4111, BOLT,CLOSE TOLERANCE

National Stock Number:
5306-00-003-4111

Federal Supply Class:
5306

National Item Identification Number:
000034111

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.

Manufacturer Information:

106467-8-69	80539	SPS TECHNOLOGIES, LLC
CA4510-8-69	29372	HOWMET GLOBAL FASTENING SYSTEMS INC.
MS27576-8-69	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS27576-8-69	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	4.838 INCHES MINIMUM AND 4.868 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	4.958 INCHES MINIMUM AND 4.958 INCHES MINIMUM AND 4.978 INCHES MAXIMUM4.978 INCHES MAXIMUM
GRIP DIAMETER	0.4982 INCHES MINIMUM AND 0.4982 INCHES MINIMUM AND 0.4991 INCHES MAXIMUM0.4991 INCHES MAXIMUM
GRIP LENGTH	4.312 INCHES MINIMUM AND 4.557 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.251 INCHES MINIMUM AND 0.251 INCHES MINIMUM AND 0.266 INCHES MAXIMUM0.266 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGONDISHED HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-83050 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
NOMINAL THREAD DIAMETER	0.500 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE
SPECIAL FEATURES	W/RETAINING ELEMENT ON SHANK
WIDTH BETWEEN FLATS	0.741 INCHES MINIMUM AND 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM0.752 INCHES MAXIMUM
SURFACE FINISH	63.0 MICROINCHES GRIP
SURFACE FINISH	63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 @TY 2 CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A3A
THREAD DIRECTION	RIGHT-HANDRIGHT-HAND
THREAD LENGTH	0.401 INCHES MINIMUM AND 0.401 INCHES MINIMUM AND 0.546 INCHES MAXIMUM0.546 INCHES MAXIMUM
THREAD QUANTITY PER INCH	20
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial