5306-00-003-4122, BOLT,CLOSE TOLERANCE

National Stock Number:
5306-00-003-4122

Federal Supply Class:
5306

National Item Identification Number:
000034122

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.

Manufacturer Information:

106467-7-51	80539	SPS TECHNOLOGIES, LLC
CA4510-7-51	29372	HOWMET GLOBAL FASTENING SYSTEMS INC.
CIPRD-MS27576-7-51R	14153	DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA
MS27576-7-51	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS27576-7-51R	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS27576-7-51	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	3.573 INCHES MINIMUM AND 3.680 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	3.770 INCHES MINIMUM AND 3.770 INCHES MINIMUM AND 3.790 INCHES MAXIMUM3.790 INCHES MAXIMUM
GRIP DIAMETER	0.4358 INCHES MINIMUM AND 0.4358 INCHES MINIMUM AND 0.4367 INCHES MAXIMUM0.4367 INCHES MAXIMUM
GRIP LENGTH	3.188 INCHES MINIMUM AND 3.204 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.220 INCHES MINIMUM AND 0.220 INCHES MINIMUM AND 0.235 INCHES MAXIMUM0.235 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGONDISHED HEXAGON
MATERIAL	STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OR STEEL COMP 6150 OVERALL
NOMINAL THREAD DIAMETER	0.438 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE
SPECIAL FEATURES	W/RETAINING ELEMENT ON SHANK
WIDTH BETWEEN FLATS	0.617 INCHES MINIMUM AND 0.617 INCHES MINIMUM AND 0.627 INCHES MAXIMUM0.627 INCHES MAXIMUM
SURFACE FINISH	63.0 MICROINCHES GRIP
SURFACE FINISH	63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A3A
THREAD DIRECTION	RIGHT-HANDRIGHT-HAND
THREAD LENGTH	0.369 INCHES MINIMUM AND 0.369 INCHES MINIMUM AND 0.482 INCHES MAXIMUM0.482 INCHES MAXIMUM
THREAD QUANTITY PER INCH	20
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial