5306-00-514-8312, BOLT,SHEAR

National Stock Number:
5306-00-514-8312

Federal Supply Class:
5306

National Item Identification Number:
005148312

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

70718-3-12	50392	SPS TECHNOLOGIES INC
70718-3-12	56878	SPS TECHNOLOGIES, LLC

Techincal Specification:

EXTENDED WASHER THICKNESS	0.054 INCHES MINIMUM AND 0.074 INCHES MAXIMUM
EXTENDED WASHER DIAMETER	0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
FASTENER LENGTH	1.095 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
GRIP DIAMETER	0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD HEIGHT	0.186 INCHES MINIMUM AND 0.206 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
WIDTH BETWEEN FLATS	0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL
SURFACE TREATMENT	NICKEL AND CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.353 INCHES MINIMUM

Click here to Register for Free 30-day Trial