5306-01-244-6875, BOLT,SHEAR

National Stock Number:
5306-01-244-6875

Federal Supply Class:
5306

National Item Identification Number:
012446875

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

MS21134H14058	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS21134H14058	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

EXTENDED WASHER DIAMETER	1.615 INCHES MINIMUM AND 1.625 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.116 INCHES MINIMUM AND 0.136 INCHES MAXIMUM
FASTENER LENGTH	4.848 INCHES MINIMUM AND 4.878 INCHES MAXIMUM
GRIP DIAMETER	0.8730 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM
GRIP LENGTH	3.615 INCHES MINIMUM AND 3.635 INCHES MAXIMUM
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.554 INCHES MINIMUM AND 0.594 INCHES MAXIMUM
HEAD STYLE	SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE	DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER	0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY	4
HOLE TYPE	DRILLED
MATERIAL	STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.875 INCHES
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	1.213 INCHES MINIMUM AND 1.263 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	14
WIDTH BETWEEN FLATS	1.034 INCHES MINIMUM AND 1.042 INCHES MAXIMUM

Click here to Register for Free 30-day Trial