6780-01-457-9363 ACCESSORY KIT,PHOTOGRAPHIC Index 5995-01-457-9365 CABLE ASSEMBLY,SPECIAL PURPOSE,E

National Stock Number:
5306-01-457-9364

Federal Supply Class:
5306

National Item Identification Number:
014579364

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
NAS6812DU2580205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.351 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH2.588 INCHES MINIMUM AND 2.618 INCHES MAXIMUM
GRIP DIAMETER0.7485 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM
GRIP LENGTH1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HEAD HEIGHT0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
HEAD STYLEDISHED HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALTITANIUM ALLOY UNS R56400 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.750 INCHES
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA80205-NAS6812 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES THREADS
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.016 INCHES MINIMUM AND 1.066 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH16
WIDTH BETWEEN FLATS1.052 INCHES MINIMUM AND 1.065 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us