5306-01-458-3586, BOLT,SHEAR

5340-01-458-3587 STANDOFF,THREADED,SPACING

National Stock Number:
5306-01-458-3586

Federal Supply Class:
5306

National Item Identification Number:
014583586

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

3D0146-10-36D	88277	THE BOEING COMPANY
84877-10-36D	56878	SPS TECHNOLOGIES, LLC
PBF1543-10-36D	27624	SPS TECHNOLOGIES LLC

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	2.854 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH	3.012 INCHES MINIMUM AND 3.042 INCHES MAXIMUM
GRIP DIAMETER	0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
GRIP LENGTH	2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM
HEAD HEIGHT	0.350 INCHES NOMINAL
HEAD MINOR DIAMETER	0.922 INCHES MINIMUM AND 0.954 INCHES MAXIMUM
HEAD STYLE	SPLINE DRIVE SHEAR HEAD
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5842 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	COBALT ALLOY MP-159 OVERALL
MINIMUM TENSILE STRENGTH	260000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.625 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.146 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.777 INCHES NOMINAL
THREAD QUANTITY PER INCH	18
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial