5306-01-533-4448, BOLT,CLOSE TOLERANCE

National Stock Number:
5306-01-533-4448

Federal Supply Class:
5306

National Item Identification Number:
015334448

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.

Manufacturer Information:

MS27576-4-70	76301	THE BOEING COMPANY
MS27576-4-70	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	4.953 INCHES MINIMUM AND 4.963 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	4.803 INCHES NOMINAL
GRIP DIAMETER	0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH	4.375 INCHES MINIMUM AND 4.391 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT,CLOSE TOLERANCE
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 316L OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OVERALL
MINIMUM TENSILE STRENGTH	95000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIAL FEATURES	RETAINING ELEMENT IN SHANK
WIDTH BETWEEN FLATS	0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
SURFACE FINISH	63.0 MICROINCHES GRIP
SURFACE FINISH	63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.282 INCHES MINIMUM AND 0.333 INCHES MAXIMUM
THREAD QUANTITY PER INCH	28
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial