| EXTENDED WASHER DIAMETER | 0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| EXTENDED WASHER THICKNESS | 0.064 INCHES NOMINAL |
| FASTENER LENGTH | 1.765 INCHES NOMINAL |
| GRIP DIAMETER | 0.188 INCHES NOMINAL |
| GRIP LENGTH | 0.438 INCHES NOMINAL |
| HEAD HEIGHT | 0.196 INCHES NOMINAL |
| HEAD STYLE | DOUBLE HEXAGON EXTENDED WASHER |
| HOLE CONFIGURATION STYLE | DOUBLE HEXAGON LONGITUDINAL HOLE |
| HOLE DIAMETER | 0.034 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| HOLE QUANTITY | 4 |
| HOLE TYPE | DRILLED |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | B1-B AIRCRAFT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP XM-13 OVERALL |
| MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| NONSTANDARD THREAD PITCH DIAMETER | +0.1674 TO 0.1697 INCHES |
| WIDTH BETWEEN FLATS | 0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.375 INCHES MINIMUM AND 0.405 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |