|
|
|
National Stock Number:
5307-00-281-6789
Federal Supply Class:
5307
National Item Identification Number:
002816789
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 105-436 | 35301 | DRESSER INDUSTRIES INC LEROI DIV |
|
Techincal Specification:
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.094 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.073 INCHES NOMINAL FIRST HOLE | | OVERALL LENGTH | 0.812 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1022 | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.375 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.250 INCHES MAXIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD QUANTITY PER INCH | 28 STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD |
|
|