|
|
|
National Stock Number:
5307-00-868-0556
Federal Supply Class:
5307
National Item Identification Number:
008680556
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 200252H | 02978 | RENK AMERICA LLC | | 200252H30 | 02978 | RENK AMERICA LLC | | 2028H30 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6332 ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 2.640 INCHES NOMINAL | | MATERIAL | STEEL COMP 3140 | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SPECIAL FEATURES | STUD END THREAD 0.003 IN. OVERSIZE | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.540 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.560 INCHES MINIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.2261 TO 0.2274 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD |
|
|