|
|
|
National Stock Number:
5310-00-005-0016
Federal Supply Class:
5310
National Item Identification Number:
000050016
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| A51G10700-11 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51G10700-11 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51G10700-11 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| THREAD SERIES | UNJEF | | NOMINAL THREAD SIZE | 1.500 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.090 INCHES NOMINAL | | NUT DIAMETER | 1.807 INCHES MINIMUM AND | | 1.817 INCHES MAXIMUM | | NUT THICKNESS | 0.281 INCHES NOMINAL | | DRIVE POINT WIDTH | 0.120 INCHES NOMINAL | | DRIVE POINT QUANTITY | 2 | | COUNTERSINK ANGLE | 120.0 DEGREES NOMINAL NUT | | SPECIAL FEATURES | DRILLED FOR LOCKING WIRE | | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 26512 | | DESIGN CONTROL REFERENCE | A51G10700-11 |
|
|