5310-00-822-6723, WASHER,FLAT

National Stock Number:
5310-00-822-6723

Federal Supply Class:
5310

National Item Identification Number:
008226723

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

FF-W-92	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
LD153-0002-1101	43999	THE BOEING COMPANY

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
COLOR	RED OVERALL
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HARDNESS RATING	83.2 ROCKWELL B MINIMUM AND 84.5 ROCKWELL B MAXIMUM
HOLE DIAMETER	0.148 INCHES MINIMUM AND 0.153 INCHES MAXIMUM
OVERALL DIAMETER	0.276 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/12 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 7075 OVERALL
PERIPHERAL SHAPE STYLE	ROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CHROMATE OR ANODIZE OVERALL
THICKNESS	0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM

Click here to Register for Free 30-day Trial