|
|
|
National Stock Number:
5310-00-913-5474
Federal Supply Class:
5310
National Item Identification Number:
009135474
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 167-7044216-136 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 35326420 | 33968 | CLARK EQUIPMENT CO | | 451457 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | 803-6397262 PC 28 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5310PL0729225 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5310009135474 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | FF-N-836 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | 99TWA1213 | 82465 | MAC LEAN FOGG LOCK NUT CO | | MS51969-5 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED | | NUT HEIGHT | 0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM | | NUT STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-637 HARD FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-637 1/2 HARD FED SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 462 OR COPPER ALLOY 464 OVERALL | | NOMINAL THREAD SIZE | 0.500 INCHES | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 13 | | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) | | WIDTH ACROSS FLATS | 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | BLACK OXIDE OVERALL |
|
|