|
|
|
National Stock Number:
5310-01-078-2992
Federal Supply Class:
5310
National Item Identification Number:
010782992
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 440-9364 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | AA55609-135 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35333-135 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM35333-135 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | FF-W-100 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35333-135 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM50.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.256 INCHES MINIMUM AND 0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM0.267 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.016 INCHES MINIMUM AND 0.016 INCHES MINIMUM AND 0.020 INCHES MAXIMUM0.020 INCHES MAXIMUM | | MATERIAL | STEEL COMP 410 OVERALL | | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 2 COMPOSITION | | OUTSIDE DIAMETER | 0.395 INCHES MINIMUM AND 0.395 INCHES MINIMUM AND 0.410 INCHES MAXIMUM0.410 INCHES MAXIMUM | | STYLE DESIGNATOR | FLAT INTERNAL TEETH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OR QQ-P-35,TYPE 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|