|
|
|
National Stock Number:
5315-00-944-1099
Federal Supply Class:
5315
National Item Identification Number:
009441099
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 78112-6 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS LLC | | 78112-6 | C0297 | GOODRICH CONTROL SYSTEMS GMBH |
|
Techincal Specification:
| EFFECTIVE LENGTH | 0.230 INCHES MINIMUM AND 0.300 INCHES MAXIMUM | | DIAMETER | 0.1240 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM | | FIRST END LOCATION | BOTH ENDS | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 43.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.010 INCHES NOMINAL | | HARDNESS RATING | 42.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | OVERALL LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 47.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.030 INCHES NOMINAL | | STYLE DESIGNATOR | GROOVE | | UNDERCUT DIAMETER | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | UNDERCUT RADIUS | 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
|
|