|
|
|
National Stock Number:
5315-01-459-1522
Federal Supply Class:
5315
National Item Identification Number:
014591522
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 2351-36761-01 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| FIRST END LOCATION | THREADED END | | FIRST END STYLE | SQUARE | | OVERALL LENGTH | 1.070 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD SIZE | 0.138 INCHES | | SECOND END TAPER LENGTH | 0.395 INCHES NOMINAL | | SECOND END TIP RADIUS | 0.030 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 60.0 DEGREES NOMINAL | | SECOND SHANK LENGTH | 0.315 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM | | SECOND UNDERCUT DIAMETER | 0.125 INCHES NOMINAL | | SECOND UNDERCUT WIDTH | 0.405 INCHES NOMINAL | | SHANK DIAMETER | 0.138 INCHES NOMINAL | | SHANK LENGTH | 0.305 INCHES NOMINAL | | SHOULDER DIAMETER | 0.250 INCHES NOMINAL | | STYLE DESIGNATOR | UNDERCUT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.305 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) | | UNDERCUT DIAMETER | 0.210 INCHES NOMINAL | | UNDERCUT WIDTH | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
|
|