|
|
|
National Stock Number:
5320-00-917-4805
Federal Supply Class:
5320
National Item Identification Number:
009174805
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| HL221-5-3 | 73197 | HI-SHEAR CORPORATION | | HL65-6-3 | 06725 | SPS TECHNOLOGIES, LLC | | HL65-6-3 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL65-6-3 | 17446 | HUCK INTERNATIONAL, INC | | HL65-6-3 | 56878 | SPS TECHNOLOGIES, LLC | | HL65-6-3 | 5M902 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | HL65-6-3 | 60516 | WEST COAST AEROSPACE, INC. | | HL65-6-3 | 73197 | HI-SHEAR CORPORATION | | HL65-6-3 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL65-6-3 | R1120 | SATAIR A/S |
|
Techincal Specification:
| MATERIAL | STEEL COMP E4340 OR | | STEEL COMP 4340 OR | | STEEL COMP 4140 OR | | STEEL COMP 8740 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR | | MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OR | | MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | SHEAR STRENGTH | 6130 DOUBLE POUNDS PER SQUARE INCH | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.376 INCHES MINIMUM AND | | 0.381 INCHES MAXIMUM | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | FASTENER LENGTH | 0.503 INCHES MINIMUM AND | | 0.523 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.079 INCHES MINIMUM AND | | 0.081 INCHES MAXIMUM | | SHANK DIAMETER | 0.2016 INCHES MINIMUM AND | | 0.2026 INCHES MAXIMUM | | GRIP LENGTH | 0.193 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73197 | | DESIGN CONTROL REFERENCE | HL65-6-3 |
|
|