| CENTER SECTION HEIGHT | 84.0 MILLIMETERS NOMINAL |
| CENTER SECTION THICKNESS | 6.5 MILLIMETERS MINIMUM AND 7.5 MILLIMETERS MAXIMUM |
| CENTER SECTION WIDTH | 70.0 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 12.5 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 45.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 15.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 6.5 MILLIMETERS MINIMUM AND 7.5 MILLIMETERS MAXIMUM |
| FIRST LEG HOLE DIAMETER | 12.3 MILLIMETERS MINIMUM AND 12.7 MILLIMETERS MAXIMUM |
| FIRST LEG LENGTH | 109.5 MILLIMETERS MINIMUM AND 112.5 MILLIMETERS MAXIMUM |
| FIRST LEG WIDTH | 70.0 MILLIMETERS NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A570 GR 36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG THICKNESS | 6.5 MILLIMETERS MINIMUM AND 7.5 MILLIMETERS MAXIMUM |
| SECOND LEG LENGTH | 109.5 MILLIMETERS MINIMUM AND 112.5 MILLIMETERS MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-53039 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PLASTIC POLYURETHANE |