5365-99-133-3989, SPACER,PLATE

National Stock Number:
5365-99-133-3989

Federal Supply Class:
5365

National Item Identification Number:
991333989

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

60202145	K4244	BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED
AMP 02 01 71025	K4244	BAE SYSTEMS GLOBAL COMBAT SYSTEMS LIMITED

Techincal Specification:

HOLE DIAMETER	6.60 MILLIMETERS MINIMUM AND 6.82 MILLIMETERS MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM-A240 ASSN STD ALL MATERIAL RESPONSES
MATERIAL	STEEL COMP 321
PART NAME ASSIGNED BY CONTROLLING AGENCY	SHIM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	19.75 MILLIMETERS MINIMUM AND 20.25 MILLIMETERS MAXIMUM
OVERALL LENGTH	109.75 MILLIMETERS MINIMUM AND 110.25 MILLIMETERS MAXIMUM
OVERALL THICKNESS	7.75 MILLIMETERS MINIMUM AND 8.25 MILLIMETERS MAXIMUM
OVERALL WIDTH	25.75 MILLIMETERS MINIMUM AND 26.25 MILLIMETERS MAXIMUM
SPECIAL FEATURES	PARTIALLY PAINTED GREEN
STYLE DESIGNATOR	NON-CIRCULAR W/SQUARE CORNERS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-53022 MIL STD 1ST TREATMENT RESPONSE
SURFACE TREATMENT	PRIMER
BOLT HOLE QUANTITY	3
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE	12.75 MILLIMETERS MINIMUM AND 13.25 MILLIMETERS MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	34.75 MILLIMETERS MINIMUM AND 35.25 MILLIMETERS MAXIMUM

Click here to Register for Free 30-day Trial