|
|
|
National Stock Number:
5905-00-405-2425
Federal Supply Class:
5905
National Item Identification Number:
004052425
Description:
RESISTOR NETWORK,FIXED,WIRE WOUN
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of high resistance wire (or ribbon), usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 1138 | 05347 | ULTRONIX INC | | 2868327-1 | 05347 | ULTRONIX INC | | 2868327-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2868327-1 | 58880 | MEGGITT (NEW HAMPSHIRE), INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 20.000 KILOHMS LOWEST RESISTANCE VALUE | | ELECTRICAL RESISTANCE | 39.985 KILOHMS INTERMEDIATE RESISTANCE VALUE | | ELECTRICAL RESISTANCE | 40.000 KILOHMS HIGHEST RESISTANCE VALUE | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 145.0 | | BODY HEIGHT | 0.650 INCHES MAXIMUM | | BODY LENGTH | 2.400 INCHES NOMINAL | | BODY WIDTH | 1.000 INCHES NOMINAL | | IDENTICAL VALUE RESISTOR QUANTITY | 1 HIGHEST RESISTANCE VALUE | | IDENTICAL VALUE RESISTOR QUANTITY | 11 INTERMEDIATE RESISTANCE VALUE | | IDENTICAL VALUE RESISTOR QUANTITY | 10 LOWEST RESISTANCE VALUE | | INCLOSURE METHOD | ENCAPSULATED | | SPECIAL FEATURES | 13 PRINTED CIRCUIT BOARD TERMINALS | | POWER DISSIPATION RATING IN WATTS | 0.500 TOTAL NETWORK | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 EACH RESISTOR | | STYLE DESIGNATOR | SINGLE INLINE | | TERMINAL LENGTH | 0.135 INCHES MINIMUM | | TERMINAL QUANTITY | 13 | | TERMINAL TYPE | PIN | | TEST DATA DOCUMENT | 10001-2868327 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|