|
|
|
National Stock Number:
5905-00-478-4206
Federal Supply Class:
5905
National Item Identification Number:
004784206
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 377-8001-010 | 13499 | ROCKWELL COLLINS, INC. | | 800-10K | 02111 | VISHAY SPRAGUE INC | | 930-5022 | 02111 | VISHAY SPRAGUE INC |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | FUNCTION CONFORMITY PER SECTION | 1ST SECTION ABSOLUTE LINEARITY | | 2ND SECTION INDEPENDENT LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS EQUATION | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 1ST SECTION | | -1.00 TO 1.00 2ND SECTION | | SHAFT BEARING TYPE | SLEEVE | | MAXIMUM STARTING TORQUE | 1.75 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 1.25 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 8.0 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | TAP LOCATION TOLERANCE PER SECTION | -0.25 TO 0.25 DEG ANGULAR ROTATION SINGLE SECTION | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | BODY DIAMETER | 1.812 INCHES NOMINAL | | BODY LENGTH | 3.667 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND | | SHAFT DIAMETER | 0.2497 INCHES NOMINAL | | SHAFT LENGTH | 0.812 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 NOMINAL | | NONTURN DEVICE LOCATION | AT 12 OCLOCK | | NONTURN DEVICE RADIUS | 0.562 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SPECIAL FEATURES | 6 DUMMY TERMINALS | | TEST DATA DOCUMENT | 13499-377-8001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | OVERALL LENGTH | 4.479 INCHES NOMINAL | | OVERALL DIAMETER | 2.031 INCHES NOMINAL |
|
|