|
|
|
National Stock Number:
5905-00-832-5237
Federal Supply Class:
5905
National Item Identification Number:
008325237
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 10545461 | 19200 | US ARMY ARDEC RDECOM | | 21054-2A | 10112 | GENERAL DYNAMICS MOTION CONTROL LLC | | 743-6181 | 04454 | SENSOR SYSTEMS, L.L.C. | | 9078 | 04454 | SENSOR SYSTEMS, L.L.C. | | 5905008325237 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 1ST SECTION AND 570.0 OHMS 2ND SECTION AND 5.0 KILOHMS 3RD SECTION AND 50.0 KILOHMS 4TH SECTION AND 5.0 KILOHMS 5TH SECTION AND 20.0 KILOHMS 6TH SECTION AND 7.0 KILOHMS 7TH SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS | | BODY DIAMETER | 3.125 INCHES MAXIMUM | | BODY LENGTH | 5.000 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FEATURES PROVIDED | HUMIDITY PROOF | | FIXED TAP QUANTITY PER SECTION | 3 3RD SECTION AND 1 4TH SECTION AND 2 5TH SECTION | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.02 TO 0.02 ALL SECTIONS | | LATERAL RUNOUT | 0.003 INCHES | | OVERALL DIAMETER | 3.364 INCHES MAXIMUM | | OVERALL LENGTH | 5.780 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 7.00 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0980 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 3.0050 INCHES MAXIMUM | | MOUNTING METHOD | CLAMP RING(S) | | SHAFT LENGTH | 0.750 INCHES NOMINAL | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND | | PILOT DIAMETER | 2.8750 INCHES MAXIMUM | | PILOT LENGTH | 0.0550 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.001 INCHES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 1ST SECTION AND -20.0 TO 20.0 2ND SECTION AND +0.0 TO 20.0 3RD SECTION AND -10.0 TO 10.0 4TH SECTION AND +0.0 TO 20.0 5TH SECTION AND -0.5 TO 0.5 6TH SECTION AND +0.0 TO 20.0 7TH SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 7 | | SHAFT DIAMETER | 0.250 INCHES MAXIMUM | | UNDERCUT DIAMETER | 2.875 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0600 INCHES MINIMUM | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0 TO 400.0 ALL SECTIONS | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL TYPE AND QUANTITY | 27 TURRET | | TEST DATA DOCUMENT | 19200-10545461 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|