|
|
|
National Stock Number:
5930-00-020-7934
Federal Supply Class:
5930
National Item Identification Number:
000207934
Description:
BOOT,DUST AND MOISTURE SEAL
Detail:
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 115389 | 16848 | LOCKHEED MARTIN SIPPICAN, INC. | | 19003-17 | 04009 | COOPER INDUSTRIES INC COOPER DISTRIBUTION EQUIPMENT DIV | | 5930PL1627835 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 404-9116-001 | 97896 | HONEYWELL INTERNATIONAL INC. | | 352250014032 | H0203 | THALES NEDERLAND B.V. | | JL80725 | K0119 | BRITISH AEROSPACE SYSTEMS & EQUIPMENT | | PL1976054 IT.58 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | M5423/11-01 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-5423/11 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILB5423-11 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | N5032B | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| STYLE DESIGNATOR | THRU-HOLE | | OVERALL HEIGHT | 0.250 INCHES NOMINAL | | BASE HEIGHT | 0.088 INCHES NOMINAL | | WIDTH ACROSS FLATS | 0.375 INCHES NOMINAL | | OPENING INSIDE DIAMETER | 0.188 INCHES NOMINAL | | MATERIAL | RUBBER SILICONE BODY | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-5847,TYPE A,CLASS 3 MIL SPEC SINGLE MATERIAL RESPONSE BODY | | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTPROOF-NEMA TYPE 13 AND | | WATERTIGHT-NEMA TYPE 4 | | MOUNTING METHOD | INTEGRAL THREADED NUT | | MOUNTING DEVICE QUANTITY | 1 | | SEALING METHOD | COMPRESSION | | BASE THREAD LOCATION | INTERNAL | | THREAD SERIES | UNS | | NOMINAL THREAD SIZE | 0.250 INCHES | | THREAD QUANTITY PER INCH | 40 | | THREAD CLASS | 2B | | THREAD LENGTH | 0.062 INCHES NOMINAL | | TEST DATA DOCUMENT | 81349-MIL-DTL-5423 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81349-MIL-DTL-5423/11 GOVERNMENT SPECIFICATION | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-5423/11 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M5423/11-01 |
|
|