|
|
|
National Stock Number:
5930-01-101-7777
Federal Supply Class:
5930
National Item Identification Number:
011017777
Description:
BOOT,DUST AND MOISTURE SEAL
Detail:
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| M5423/14-03 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-B-5423/14 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-5423/14 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM INSIDE OPENING TO BASE EDGE | 0.750 INCHES NOMINAL | | BASE OVERALL LENGTH | 2.000 INCHES NOMINAL | | BASE WIDTH | 3.156 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.750 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.062 INCHES NOMINAL | | FEATURES PROVIDED | COMPONENT SWITCH | | FIRST DISTANCE FROM MOUNTING HOLE CENTER TO BASE EDGE | 0.484 INCHES NOMINAL | | OVERALL HEIGHT | 0.921 INCHES NOMINAL | | OVERALL LENGTH | 3.718 INCHES NOMINAL | | OVERALL WIDTH | 3.656 INCHES NOMINAL | | MATERIAL | RUBBER SILICONE BODY | | MOUNTING HOLE DIAMETER | 0.160 INCHES NOMINAL | | MOUNTING METHOD | UNTHREADED HOLE(S) | | SECOND DISTANCE FROM MOUNTING HOLE CENTER TO BASE EDGE | 0.797 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 81349-MIL-B-5423/14 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | THRU-HOLE | | TEST DATA DOCUMENT | 81349-MIL-B-5423 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|