|
|
|
National Stock Number:
5935-00-405-1297
Federal Supply Class:
5935
National Item Identification Number:
004051297
Description:
BACKSHELL,ELECTRICAL CONNECTOR
Detail:
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
|
Manufacturer Information:
| 25-34KH10 | 95238 | WINCHESTER INTERCONNECT CORPORATION | | 3522 500 09468 | H0203 | THALES NEDERLAND B.V. | | MIL-C-28748 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-28748 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS18192-T3 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS18192T3 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | XMRE34-0300X | 81312 | WINCHESTER INTERCONNECT CORPORATION |
|
Techincal Specification:
| CABLE OPENING QUANTITY | 1 | | CABLE OPENING WIDTH | 0.340 INCHES MINIMUM | | CABLE OPENING LENGTH | 0.340 INCHES MINIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.683 INCHES MINIMUM AND 1.693 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM | | OVERALL HEIGHT | 1.970 INCHES MAXIMUM | | OVERALL LENGTH | 1.984 INCHES MINIMUM AND 2.016 INCHES MAXIMUM | | OVERALL WIDTH | 0.812 INCHES MINIMUM AND 0.844 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY | | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE(S) | | NOMINAL THREAD SIZE | 0.112 INCHES | | SIZE DESIGNATION | 34 | | SPECIFICATION/STANDARD DATA | 96906-MS18192 GOVERNMENT STANDARD | | STYLE DESIGNATOR | HOOD, TOP OPENING W/CLAMP | | SURFACE TREATMENT | CADMIUM | | TEST DATA DOCUMENT | 81349-MIL-C-28748 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
|
|