| DUTY CYCLE | INTERMITTENT |
| ENCLOSURE FEATURE | DRIPPROOF PROTECTED-15 DEG |
| BEARING TYPE | ANNULAR BALL |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | NATURAL CONVECTION VENTILATED |
| CURRENT RATING METHOD | LOAD |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| INCLOSURE SPECIFICATION | MIL-STD-108 |
| KEYWAY LENGTH | 2.7500 INCHES NOMINAL IDENTICAL ENDS |
| KEYWAY WIDTH | 0.5000 INCHES NOMINAL IDENTICAL ENDS |
| KEYWAY DEPTH | 0.2500 INCHES NOMINAL IDENTICAL ENDS |
| OVERALL HEIGHT | 28.437 INCHES |
| OVERALL LENGTH | 43.500 INCHES |
| OVERALL WIDTH | 29.437 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE(S) |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 18.000 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 20.000 INCHES |
| PHASE | THREE INPUT |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 12.500 INCHES IDENTICAL ENDS |
| SHAFT DIAMETER | 2.1250 INCHES NOMINAL IDENTICAL ENDS |
| SHAFT END STYLE | FLAT KEYWAY IDENTICAL ENDS |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE IDENTICAL ENDS |
| SPECIFIC USE | DECK EDGE AIRPLANE ELEVATOR DOORS |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| TEMP RATING | 40.0 OPERATING CELSIUS |
| TERMINAL TYPE AND QUANTITY | 6 SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-M-17060 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |